Definition and Function of Traffic-Table, DBA-profile, TCONT, GEM, GEM port, ont-lineprofile...

1. What is definition describe about Traffic Table?

Traffic Table is a profile template that specify bandwidth both download and upload traffic on ONT. We can use it to limit bandwidth on UNI port (ONT LAN port). Traffic Table used to control traffic outbound and inbound on ONT which is configure within service-port.

Raisecom OLT trouble shooting, describe with the show command...

How to trouble shooting Raisecom OLT, something describe with the show command....

RaisecomOLT#show interface epon-olt information //Show amount of ONUs on each PON

Configure Step NOKIA 7360 FX-4

How to configure Nokia OLT, configure register nokia ont from first step to complete till internet working

I. Set QoS profile UP and Down stream
II. Create VLAN and VPLS service
III. Add ONT / ONT register
IV. Add ONT slot and active UNI interface
V. Add QoS to ONT 
VI. Add VLAN to ONT port
complete this step, ONT can access to the internet

NOKIA FTTH demonstrate different feature from GPON OLT, ONT and NMS

To showcase the Alcatel-Lucent 7360 FX (FTTx) solution capabilities & demonstrate different features from GPON OLT, ONT and NMS

1. Hardware
2. Network Topology 


1. Hardware

7360 ISAM FX FEATURES

• Mix of fiber services
• GPON, EPON*
• NG PON: 10G XGPON-1, 10G EPON*
• Point-To-Point
• Convenience of three shelf sizes
• FX-4/8/16
• Up to 256 PON ports with 
• 16 port GPON line card (FX-16)
• Shared ONT portfolio with ISAM FD and 7342 ISAM FTTU
• Active/active redundancy
• Layer 3 and MPLS features

Opnet-OLT ONU configuration

How to configure Opnet OLT, register ONU add VLAN, limit bandwidth...
Configuration add ONU index, ONU type
The new ONU will got alarm de-register as below then we add or register this ONU

Go to Maintenance => click on PON => ONU Presetting => add ONU ID, Mac address and ONU Type then Create.

How To Bind VAS Profile To ONT / Dial up ONT by U2000

Access to U2000 Application

Double click on NE node 

Double click on PON where ONT is located

How to register ONT on huawei OLT from first step to complete working

I. Create Profile Template

        1. Create Traffic Table

        2. Create DBA profile

        3. Create service profile
        4. Create VLAN add VLAN to up link and gem mapping

        5. Create line profile

                a. Create tcont to bound with dba profile

                b. Create gem to bound into tcont

                c. Create gem mapping to map vlan

II. Register ONT

        1. Add ONT as router

                a. ont add to line profile and service profile

                b. add service port

                c. add vasprofile

         2. Add ONT as bridge 

                a. ont add to line profile and service profile

                b. Add native vlan

                c. add service port

I. Create Profile Template

   1. Create Traffic Table, How to create traffic table

use the command #traffic table ip index <traffic-table-index> name “put-your-standard-name” cir <bandwidth> pir <bandwidth> priority 0 priority local-setting.

About us

I am a student used to love an IT skill sine I was in high school, to carry on this field I spend much time to learn and research new technology. From a farmer guy never know how big the technology grow from day to day. At 2009 I ask my mom to buy a secondhand laptop while she don't know what a laptop is? I had been trying explain to her. After a month she had told my relative who live at city to bough it to me 😃😃😃 I am very happy so much. I am starting learning searching and learning from internet till I pass to university life.

In the university I refer on Networking rather than programming because I think I don't like to sit and thinking alone, anyway I got high score whit networking in class. While I am year 3 I had pass interview to work in ISP as call center, from that I got lot of working experience. To carry on forward I had apply to other company after I complete one year as my call center life. I had pass with other ISP company as technical support engineer, from day to day I meet lot of  obstacle but give me more and more experience till now I am network engineer holding L2, L3 networking layer.

Why I create this blogspot?

This blogsport is all about FTTH Technology that I have learned some of their feature not all clear and profession  but just want to share together and improve my skill too. Remember the first time for me that my boss give me to configure OLT device what I never used to learn about it before and no any document handover to me. What I need to do for the first step? Searching? Ask friend who have experience about this? Time never wait us. I start open google and searched, list of documents come lot of documents I need to read but not all I want. Totally difficulty to find document we want so I create this blogsopt purpose to share and learning together. 

Why named FTTH Learning?

FTTH Learning is my blogspot name but it widely show that everyone can learn and study what ever you can search, what ever you need and also share your knowledge to everyone by comment or discuss with us. We are friendly to see and discussing what we need to improve our knowledge.

In totally I wish everyone enjoy my topics. I will try my best to searching and sharing all my experience and trying to customize every topic to easy understand (short but fully meaning). Hopefully you all share me if have any mistakes I wrote and thanks for learning and sharing with us.